Related Searches: 1000m Turntable Rotary Water Well Drilling Rig | 1000m Turntable Rotary Water Well Drill Rig | 1000m Turntable Rotary Well Drilling Rig
Product List

1000m Water Well Drill Rig

1000m water well rig belongs to water well rotary drill rig truck. Its components are mounted on the "HOWO” brand truck. Most parts of the machine adopt hydraulic driven and the other part is mechanical driven.

In addition to the main operating mode of rotary drilling, the 1000m water well rig can be adapted to other drilling mode if it is equipped with drilling tool which is suitable for drilling through various strata such as clay, sand and matrix etc. At the beginning of boring, pressuring mechanism is used by water well drill rig truck to promote the efficiency of shallow-hole drilling. With the increasing depth, when the weight of the drill tool is greater than the pressure required applying to the drill tool, the main hoisting system should be used to carry out reduced pressure drilling.

Parameter of 1000m Water Well Rig

The shape size:
The whole machine weight
Drilling aperture:500MM
The drilling depth:1000M
Hole drill pipe :φ89
Drill chassis parts
① Chassis: HOWO
② Driving method: 8×4

The mast section
① Type: Truss type
② Load: 60T
③ Height:15M
④ The characteristics of the mast: The mast with double hydraulic cylinder pressure device , and the pressure of 350000N
Diesel power part

Diesel engine model: BF8L513C


Mud Pump
Model BW1500 mud pump
maximum pressure 12 MPa
maximum pump discharge 1500 L/min

The guide pull down mechanism

The maximum pull down 350000N
Pull down stroke 10.6M
Pull down doe rope diameter Φ9.3 MM

Rotary table gear box
Output speed (r/min)

Ⅰ Ⅱ Ⅲ IV V reversal
27 49 80 131 208 35

Main hoist
hoisting tool
① Single rope tension 68600N
② Winch rope capacity (m): 130/Φ21.5

control panel
All hydraulic operation, the source of power for hydraulic pump,convenient and efficient

rotary table
Rotary table through hole diameter (mm) Φ505
Remarks:Speed parameters see Rotary table gear box
The rig can be installed 30KW generator
After the installation of generator, can be used as electric welding, lighting, and other useful life.
Related Products