300m Water Well Drill Rigs

300m water well drilling and rig machine is used for drilling wells, lifting downhole tubes and doing well flushing. The machine is composed of power equipment, drills, drill pipe, core barrel and drilling rig.

Features

1. With comprehensive design, 300m water well drilling and rig machine is able to work steady in atrocious weather.
2. The machine is featured with high integration degree, which makes it easier and convenient for preparation before operating.
3. 300m hydraulic drilling rig is applicable for the field of metallurgy, geology, petroleum, coal, water conservancy, forestry, troops, building materials and so on.
4. It is suitable for operating in clay layer, sand layer, gravel layer, bed rock layer, etc.
5. The machine adopts full hydraulic control, which is simple and convenient.
6. Our 300m water well drilling and rig machine is approved by ISO9001:2008 quality management system certificate and military products standard.

Parameters of 300m Hydraulic Drilling Rig

The shape size: 10850×2470×3870(MM)				The whole machine weight 12T
Drilling aperture:500MM				The drilling depth:300M
Kelly:108×108×7500MM				Hole drill pipe :φ89
The mast section	① Type: Van ② Load :15T ③ Height:11M ④ The characteristics of the mast: Mast with hydraulic hole pressure device, and the pressure of 2000KG ⑤ At the top of a lighting device
Diesel power part	Diesel engine model: F6L912 OR 6135AN
	air patenting				water-cooling
	Power/Speed				Power/Speed
	74KW 2300r/min				100KW 1500r/min
	maximum torque / speed				maximum torque / speed
	345NM 1600r/min				647NM 1250r/min
Mud Pump	Model BW900/25 mud pump maximum pressure 2.5 MPa maximum pump discharge 1030 L/min required power 52 Horsepower suction pipe diameter Φ102 MM diameter of the drain pipe Φ64 MM
The guide pull down mechanism	The maximum pull down 2000 KG Pull down stroke 1000 MM Guide rod diameter Φ50 MM Pull down doe rope diameter Φ9.3 MM
Rotary table gear box	Output speed (r/min) Ⅰ Ⅱ Ⅲ reversal 44 68 105 34
Main hoist	① Single rope tension 3000KG ② Drum diameter: φ273MM ③ wirerope diameter Φ15.5MM ④ rope capacity 120M
	shelves	Ⅰ			Ⅱ	Ⅲ
	speed (r/min)	43			85	122
Include Vice winch, tool winch	Vice winch	① Single rope tension 2000KG ② Drum diameter: φ268MM ③ wirerope diameter Φ15.5MM ④ rope capacity 120M
		shelves	Ⅰ		Ⅱ	Ⅲ
		speed (r/min)	21.5		42.5	61
	winch tool	① Single rope tension 2000KG ② Drum diameter: φ268MM
		shelves	Ⅰ		Ⅱ	Ⅲ
		speed (r/min)	21.5		42.5	61
control panel	All hydraulic operation, the source of power for hydraulic pump,convenient and efficient
rotary table	Rotary table through hole diameter (mm) Φ505 Remarks: Speed parameters see Rotary table gear box
The rig can be installed 30KW generator	After the installation of generator, can be used as electric welding, lighting, and other useful life.
The rig can also be provided with the motor and starting cabinet as power, and can power, diesel dual.