SPC-300HW Water Well Drill Rig

SPC-300HW water well drill rig is truck mounted rotary water well drilling equipment. The main parts of the machine are installed in the "HOWO” 6×6 automotive chassis. Diesel engine and motor can be added on drilling equipment as power. SPC-300HW water well drill rig adopts direct cycle drilling mode to realize air DTH hammer drilling. The machine is equipped with pressure device which greatly enhance the drilling efficiency.
SPC-300HW water well drilling equipment is widely used in agriculture and drinking water supply.

Parameters of SPC-300HW Water Well Drill Rig

The shape size: 10880×2500×4100(MM)		The whole machine weight 21T
Drilling aperture:500MM		The drilling depth:300M
Kelly:108×108×7500MM		Hole drill pipe :φ89
Drill chassis parts	① Chassis: HOWO StateⅣ ② Driving method: 6×6
The mast section	① Type: Van ② Load :15T ③ Height:11M ④ The characteristics of the mast: Mast with hydraulic hole pressure device, and the pressure of 2000KG ⑤ At the top of a lighting device
Diesel power part	Diesel engine model: F6L912
	air patenting
	Power/Speed
	74KW 2300r/min
	maximum torque / speed
	345NM 1600r/min
Mud Pump	Model BW900/25 mud pump maximum pressure 2.5 MPa maximum pump discharge 1030 L/min required power 52 Horsepower suction pipe diameter Φ102 MM diameter of the drain pipe Φ64 MM
The guide pull down mechanism	The maximum pull down 2000 KG Pull down stroke 1000 MM guide rod diameter Φ50 MM Pull down doe rope diameter Φ9.3 MM
Rotary table gear box	Output speed (r/min) Ⅰ Ⅱ Ⅲ reversal 44 68 105 34
Main hoist	① Single rope tension 3000KG ② Drum diameter: φ273MM ③ wirerope diameter Φ15.5MM ④ rope capacity 120M
	shelves	Ⅰ			Ⅱ			Ⅲ
	speed (r/min)	43			85			122
Include Vice winch, tool winch	Vice winch	① Single rope tension 2000KG ② Drum diameter: φ268MM ③ wirerope diameter Φ15.5MM ④ rope capacity 120M
		shelves		Ⅰ			Ⅱ			Ⅲ
		speed (r/min)		21.5			42.5			61
	winch tool	① Single rope tension 2000KG ② Drum diameter: φ268MM
		shelves		Ⅰ			Ⅱ			Ⅲ
		speed (r/min)	21.5			42.5			61
control panel	All hydraulic operation, the source of power for hydraulic pump,convenient and efficient
rotary table	Rotary table through hole diameter (mm) Φ505 Remarks:Speed parameters see Rotary table gear box
The rig can be installed 30KW generator	After the installation of generator, can be used as electric welding, lighting, and other useful life.
The rig can also be provided with the motor and starting cabinet as power, and can power, diesel dual.