SPC-400 Water Well Drill Rig

SPC-400 water well drill rig is truck mounted water well drilling rig. The main parts of the machine are installed in the "HOWO” 6×6 automotive chassis. Diesel engine and motor can be added on drilling equipment as power. SPC-400 water well drill rig adopts direct cycle drilling mode to realize air DTH hammer drilling. The machine is equipped with pressure device which greatly enhance the drilling efficiency.
SPC-400 truck mounted water well drilling rig is widely used in agriculture and drinking water supply.

Parameters of SPC-400 Water Well Drill Rig

The shape size: 12000×2500×4230(MM)				The whole machine weight 25T
Drilling aperture:500MM				The drilling depth:400M
Kelly:108×108×7500MM				Hole drill pipe :φ89
Drill chassis parts	① Chassis: HOWO ② Driving method: 6×6
The mast section	① Type: Van ② Load :15T ③ Height:11M ④ The characteristics of the mast: Mast with hydraulic hole pressure device, and the pressure of 2000KG ⑤ At the top of a lighting device
Diesel power part	Diesel engine model: F6L912 OR 6135AN
	air patenting				water-cooling
	Power/Speed				Power/Speed
	74KW 2300r/min				100KW 1500r/min
	maximum torque / speed				maximum torque / speed
	345NM 1600r/min				647NM 1250r/min
Mud Pump	Model BW900 mud pump maximum pressure 2.5 MPa maximum pump discharge 900 L/min
The guide pull down mechanism	The maximum pull down 2000 KG Pull down stroke 1000 MM guide rod diameter Φ50 MM Pull down doe rope diameter Φ9.3 MM
Rotary table gear box	Output speed (r/min) Ⅰ Ⅱ Ⅲ reversal 49 131 208 35
Main hoist	① Single rope tension 4410KG ② rope capacity 130/φ19.5
Include Vice winch, tool winch	Vice winch	① Single rope tension 2000KG ② Drum diameter: φ268MM ③ wirerope diameter Φ15.5MM ④ rope capacity 120M
		shelves	Ⅰ		Ⅱ	Ⅲ
		speed (r/min)	21.5		42.5	61
	winch tool	① Single rope tension 2000KG ② Drum diameter: φ268MM
		shelves	Ⅰ		Ⅱ	Ⅲ
		speed (r/min)	21.5		42.5	61
control panel	All hydraulic operation, the source of power for hydraulic pump,convenient and efficient
rotary table	Rotary table through hole diameter (mm) Φ505 Remarks: Speed parameters see Rotary table gear box
The rig can be installed 30KW generator	After the installation of generator, can be used as electric welding, lighting, and other useful life.
The rig can also be provided with the motor and starting cabinet as power, and can power, diesel dual.