SPC-600 Water Well Drill Rig

SPC-600 water well drilling rig is truck mounted rotary drilling rig. The main parts of the machine are installed in the "HOWO” 6×6 automotive chassis. Diesel engine and motor can be added on drilling equipment as power. SPC-600 water well drilling rig adopts direct cycle drilling mode to realize air DTH hammer drilling. The machine is equipped with pressure device which greatly enhance the drilling efficiency.
SPC-600 truck mounted rotary drilling rig is widely used in agriculture and drinking water supply.

Parameters of SPC-600 Water Well Drilling Rig

The shape size: 12000×2500×4230(MM)		The whole machine weight 25T
Drilling aperture:500MM		The drilling depth:600M
Kelly:108×108×7500MM		Hole drill pipe :φ89
Drill chassis parts	① Chassis: HOWO State IV ② Driving method: 6×6
The mast section	① Type: Truss type ② Load: 60T ③ Height: 11M ④ The characteristics of the mast: The mast with double hydraulic cylinder pressure device , and the pressure of 196000N
Diesel power part	Diesel engine model: BF6L913C
	air patenting
	Power/Speed
	141KW 2500r/min
	maximum torque / speed
	490N.m/1650r/min
Mud Pump	Model BW1100/50 mud pump maximum pressure 5 MPa maximum pump discharge 1100 L/min
The guide pull down mechanism	The maximum pull down 196000N Pull down stroke 7.6M Pull down doe rope diameter Φ9.3 MM
Rotary table gear box	Output speed (r/min) Ⅰ Ⅱ Ⅲ IV V reversal 27 49 80 131 208 35
Main hoist	① Single rope tension 44100N ② Drum diameter: φ280MM ③ wirerope diameter Φ19.5MM
	shelves	Ⅰ	Ⅱ			Ⅲ		Ⅳ		Ⅴ
	speed (r/min)	27	49			80		131		208
Include Vice winch, tool winch	Vice winch	① Single rope tension 19600N ② Drum diameter: φ185MM
		shelves			Ⅰ	Ⅱ	Ⅲ		Ⅳ		Ⅴ
		speed (r/min)			27	49	80		131		208
	winch tool	① Single rope tension 10000N ② Drum diameter: φ150MM ③ wirerope diameter Φ11MM ④ rope capacity 45M
		shelves			Ⅰ	Ⅱ	Ⅲ		Ⅳ		Ⅴ
		speed (r/min)		27		49	80		131		208
control panel	All hydraulic operation, the source of power for hydraulic pump,convenient and efficient
rotary table	Rotary table through hole diameter (mm) Φ505 Remarks:Speed parameters see Rotary table gear box
The rig can be installed 30KW generator	After the installation of generator, can be used as electric welding, lighting, and other useful life.