SPC-600HW Water Well Drill Rig

SPC-600HW water well drilling rig is truck mounted rotary drilling rig. The main parts of the machine are installed in the "HOWO” 6×6 automotive chassis. Diesel engine and motor can be added on drilling equipment as power. SPC-600HW water well drilling rig adopts direct cycle drilling mode to realize air DTH hammer drilling. The machine is equipped with pressure device which greatly enhance the drilling efficiency.
SPC-600 water well drilling rig is widely used in agriculture and drinking water supply.
Our Company is an experienced China water well drill rig supplier, we have different kinds of quality products for sale.

Parameters of SPC-600HW Water Well Drilling Rig

The shape size: 12000×2500×4230(MM)		The whole machine weight 25T
Drilling aperture:500MM		The drilling depth:600M
Kelly:108×108×7500MM		Hole drill pipe :φ89
Drill chassis parts	① Chassis: HOWO ② Driving method: 6×6 ③Wheelbase 4600MM+1350MM ④ Tread wheel (along) 2041MM ⑤ Rear wheels (the distance between the center line of twins) 1830/1830MM ⑥ Steel plate spring leaf number 10/12 ⑦ Fuel type diesel ⑧ Number of tire 10 ⑨ tyre size 11.00R20 16PR ⑩ Truck mounted rig speed (speed) 70 KM/H
The mast section	① Type: Truss type ② Load :60T ③ Height:15M ④ The characteristics of the mast: 196000N The mast with double hydraulic cylinder pressure device , and the pressure of 196000N
power part	Electric motor model:
	Power 132KW
	frequency inverter
Mud Pump	Model BW1100/50 mud pump maximum pressure 5 MPa maximum pump discharge 1100 L/min required power 95 Horsepower suction pipe diameter Φ150 MM diameter of the drain pipe Φ76MM
The guide pull down mechanism	The maximum pull down 196000N Pull down stroke 7.6M Pull down doe rope diameter Φ9.3 MM
Rotary table gear box	Output speed (r/min) Ⅰ Ⅱ Ⅲ IV V reversal 27 49 80 131 208 35
Main hoist Include Bailing , tool winch	Bailing		① Single rope tension 20000N ② Drum diameter: φ185MM ③ wirerope diameter Φ11MM ④ rope capacity 450M ⑤ Rope speed 1.6m/s
	winch tool		① Single rope tension 10000N ② Drum diameter: φ150MM ③ wirerope diameter Φ11MM ④ rope capacity 450M
control panel	All hydraulic operation, the source of power for hydraulic pump,convenient and efficient
rotary table	Rotary table through hole diameter (mm) Φ505 Remarks: Speed parameters see Rotary table gear box
The rig can be installed 30KW generator	After the installation of generator, can be used as electric welding, lighting, and other useful life.
Diesel power part	Diesel engine model: BF6L913C
	air patenting
	Power/Speed
	141KW 2500r/min
	maximum torque / speed
	490N.m/1650r/min