SPC-1000 Water Well Drill Rig

SPC-1000 water well rig is truck mounted water well drilling rig truck. The main parts of the machine are installed in the "HOWO” 8×4 automotive chassis. Diesel engine and motor can be added on drilling equipment as power. SPC-1000 water well rig adopts direct cycle drilling mode to realize air DTH hammer drilling. The machine is equipped with pressure device which greatly enhance the drilling efficiency.
SPC-1000 water well drilling rig truck is widely used in agriculture and drinking water supply.

Parameter

The shape size: 14180×2500×4100(MM)		The whole machine weight 29T
Drilling aperture:500MM		The drilling depth:1000M
Kelly:108×108×10450MM		Hole drill pipe :φ89
Drill chassis parts	① Chassis: HOWO ② Driving method: 8×4
The mast section	① Type : Truss type ② Load : 60T ③ Height: 15M ④ The characteristics of the mast:The mast with double hydraulic cylinder pressure device , and the pressure of 350000N
Diesel power part	Diesel engine model: BF8L513C
	Power/Speed: 213kW/2300r/min
Mud Pump	Model BW1500 mud pump maximum pressure 12 MPa maximum pump discharge 1500 L/min
The guide pull down mechanism	The maximum pull down 350000N Pull down stroke 10.6M Pull down doe rope diameter Φ9.3 MM
Rotary table gear box	Output speed (r/min) Ⅰ Ⅱ Ⅲ IV V reversal 27 49 80 131 208 35
Main hoist hoisting tool	① Single rope tension 68600N ② Rope capacity (m): 130/Φ21.5
control panel	All hydraulic operation, the source of power for hydraulic pump,convenient and efficient
rotary table	Rotary table through hole diameter (mm) Φ505 Remarks:Speed parameters see Rotary table gear box
The rig can be installed 30KW generator	After the installation of generator, can be used as electric welding, lighting, and other useful life.