SPC-300D（6×4）Water Well Drill Rig

SPC-300D (6×4) water well drilling rig truck is truck mounted water well rig. Its main parts are mounted on the chassis of "Dongfeng” EQ1141 type 6×4 truck. Both diesel engine and electromotor can be added on machine as power. SPC-300D (6×4) water well drilling rig truck adopts direct cycle drilling mode to realize air DTH hammer drilling. It adopts pressure device and hydraulic control, which greatly enhance drilling efficiency.
SPC-300D (6×4) water well rig is widely applied in agriculture irrigation and drinking water supply.

Parameters of SPC-300D（6×4）Water Well Drilling Rig Truck

The shape size: 10880×2500×4100(MM)		The whole machine weight 18T
Drilling aperture:500MM		The drilling depth:300M
Kelly:108×108×7500MM		Hole drill pipe :φ89
Drill chassis parts	① Chassis:DONGFENG ② Driving method:6×4
The mast section	① Type: Van ② Load :15T ③ Height: 11M
Diesel power part	Diesel engine model: F6L912 OR 6135AN
	air patenting				water-cooling
	Power/Speed				Power/Speed
	74KW 2300r/min				100KW 1500r/min
	maximum torque / speed				maximum torque / speed
	345NM 1600r/min				647NM 1250r/min
Mud Pump	Model BW900/25 mud pump maximum pressure 2.5 MPa maximum pump discharge 900 L/min required power 52 Horsepower suction pipe diameter Φ102 MM diameter of the drain pipe Φ64 MM
The guide pull down mechanism	The maximum pull down 2000 KG Pull down stroke 1000 MM guide rod diameter Φ50 MM Pull down doe rope diameter Φ9.3 MM
Rotary table gear box	Output speed (r/min) Ⅰ Ⅱ Ⅲ reversal 52 78 123 40
Main hoist	① Single rope tension 3000KG ② Drum diameter: φ273MM ③ wirerope diameter Φ15.5MM ④ rope capacity 120M
	shelves	Ⅰ			Ⅱ			Ⅲ
	speed (r/min)	43			85			122
Include Vice winch, tool winch	Vice winch	① Single rope tension 2000KG ② Drum diameter: φ268MM ③ wirerope diameter Φ15.5MM ④ rope capacity 120M
		shelves		Ⅰ			Ⅱ			Ⅲ
		speed (r/min)		21.5			42.5			61
	winch tool	① Single rope tension 2000KG ② Drum diameter: φ268MM
		shelves		Ⅰ			Ⅱ			Ⅲ
		speed (r/min)	21.5			42.5			61
control panel	All hydraulic operation, the source of power for hydraulic pump,convenient and efficient
rotary table	Rotary table through hole diameter (mm) Φ505 Remarks:Speed parameters see Rotary table gear box
The rig can be installed 30KW generator	After the installation of generator, can be used as electric welding, lighting, and other useful life.
The rig can also be provided with the motor and starting cabinet as power, and can power, diesel dual.